| The One Ring http://www.one-ring.co.uk/ |
|
| Saving bad water effects http://www.one-ring.co.uk/viewtopic.php?f=7&t=32444 |
Page 1 of 1 |
| Author: | Scib [ Thu Sep 08, 2016 9:30 pm ] |
| Post subject: | Saving bad water effects |
Hi, I've not much experience with water effects and the section I have tried hasnt come out very well (uneven, bubbles etc) - is there a way to fix this or does anyone have tips to potentially cover it up e.g. foliage, plants? |
|
| Author: | Oldman Willow [ Fri Sep 09, 2016 12:48 am ] |
| Post subject: | Re: Saving bad water effects |
I can't make suggestions with so little information. What did you use to create the effect? |
|
| Author: | Scib [ Sat Sep 10, 2016 12:14 pm ] |
| Post subject: | Re: Saving bad water effects |
I used "Deluxe Materials" scenic water, it comes solid in a jelly like blob which you warm up and then pour |
|
| Author: | Oldman Willow [ Sat Sep 10, 2016 2:17 pm ] |
| Post subject: | Re: Saving bad water effects |
I have not tried that brand. I do not use the Woodland Scenic version because it turns yellow. If you have a hair dryer try reheating. I do not have much confidence that will remove bubbles. It may smooth it out a bit. A real heat gun will be too hot. |
|
| Author: | Scib [ Sat Sep 10, 2016 2:42 pm ] |
| Post subject: | Re: Saving bad water effects |
Thanks I will try reheating, if not I think I should be able to remove it from the board and start again |
|
| Author: | Nevinsrip [ Sat Sep 10, 2016 9:55 pm ] |
| Post subject: | Re: Saving bad water effects |
Before you start over, take some super fine grit sandpaper, wet it a bit and sand away. Once you have a smooth surface, do another pour. Be sure to remove all the dust and loose material first. Make sure your surface is level and you can smooth things over with a piece of plastic, like they use to smooth out wallpaper. Let us know how it works out. |
|
| Author: | Scib [ Sat Sep 17, 2016 6:27 pm ] |
| Post subject: | Re: Saving bad water effects |
I managed to remove it, I retried using woodland scenics water effects which was a lot easier to work with and it turned out better Thanks for your help |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|