All times are UTC


It is currently Fri Mar 29, 2024 4:58 am



Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Another use for shaper sheet
PostPosted: Mon Apr 27, 2015 5:45 pm 
Loremaster
Loremaster
Offline

Joined: Wed May 21, 2014 1:55 am
Posts: 1465
Location: Seattle,Washington USA
I know that some people don't want to waste time or money on terrain for their wargaming, but still don't want to play on a flat table.

I had bought some Woodland Scenics shaper sheet (http://woodlandscenics.woodlandscenics. ... 178/page/1) to play with and decided to see what I could do with it. In the US you can buy this at Hobby Lobby with a 40% off coupon.

I cut off a 9in by 9in piece and colored it with some craft paint, then I crumpled it a little to dry brush on another color just to break up the monotony. It to dry for awhile, as it soaks up the paint and if you don't let it dry, you get it all over your hands as you shape it.

Image

Once the paint was dry, I decided to see what I could do with it.

Could crumple the edge or leave it flat as just difficult terrain:

Image

Make a small hill with it:

Image

Make a quick mine entrance with it:

Image

Cut the roll into several sizes, color brown/green or grey for rockier hills, add some terrain to your table for a relatively cheep price.

Word of caution, when you form it into a hill or mountain without support underneath, it does press in quite easily if you push a figure on top. Just placing a figure on it is ok. Could always fall back to the classic of putting a book on the table and forming the sheet around that.

Best of all, it lays flat or rolls again for storage.

_________________
"Even darkness must pass. A new day will come. And when the sun shines it will shine out the clearer."


Last edited by Mapper on Tue Sep 05, 2017 7:34 pm, edited 4 times in total.
Top
  Profile  
Reply with quote  
 Post subject: Re: Quick and easy terrain for your table
PostPosted: Tue Apr 28, 2015 2:46 pm 
Wayfarer
Wayfarer
User avatar
Offline

Joined: Mon Jan 19, 2015 9:52 pm
Posts: 33
Location: Quebec, Qc
Hi Mapper, did you use the shaper sheet plaster? I think it is supposed to harden your shaper sheet creation.
Top
  Profile  
Reply with quote  
 Post subject: Re: Quick and easy terrain for your table
PostPosted: Tue Apr 28, 2015 3:20 pm 
Loremaster
Loremaster
Offline

Joined: Wed May 21, 2014 1:55 am
Posts: 1465
Location: Seattle,Washington USA
Thanks Stan158, no, I haven't used the plaster yet, still playing around with the shaper sheet to see if I want to use it on a project I want to keep or that needs to be more durable.

_________________
"Even darkness must pass. A new day will come. And when the sun shines it will shine out the clearer."
Top
  Profile  
Reply with quote  
 Post subject: Re: Quick and easy terrain for your table
PostPosted: Tue Apr 28, 2015 9:40 pm 
Wayfarer
Wayfarer
User avatar
Offline

Joined: Mon Jan 19, 2015 9:52 pm
Posts: 33
Location: Quebec, Qc
Alright! let us know if you use it, I've been wondering if it's working well!
Top
  Profile  
Reply with quote  
 Post subject: Re: Quick and easy terrain for your table
PostPosted: Tue Apr 28, 2015 10:54 pm 
Elven Warrior
Elven Warrior
Offline

Joined: Mon Mar 02, 2015 6:59 pm
Posts: 966
Location: Calgary, Canada
I think you might want to put the shaper sheet on some kind of form if you are layering it with plaster--check the manufacturer's instructions.

I use plaster of paris all the time--it's super cheap. Just water some down and paint it over top when you are happy with your shape. It will leave brush strokes, but a nice application of glue and dirt/sand/gravel/ballast/whatever will take care of that. I personally liked the rocks the best. :wink:

_________________
"Diplomacy is the art of saying 'nice doggie' until you can find a rock." -Will Rogers
Top
  Profile  
Reply with quote  
 Post subject: Re: Quick and easy terrain for your table
PostPosted: Wed Apr 29, 2015 6:49 am 
Kinsman
Kinsman
User avatar
Offline

Joined: Thu Jan 15, 2015 8:21 am
Posts: 92
Location: Oslo, Norway
Very interesting, thanks for the share!

Might consider using something like this on my next project..

_________________
Click here to check out my YouTube Battle Companies Campaign, Black Numenoreans vs. Dunlendings!
Top
  Profile  
Reply with quote  
 Post subject: Re: Quick and easy terrain part 2
PostPosted: Sat May 02, 2015 7:55 pm 
Loremaster
Loremaster
Offline

Joined: Wed May 21, 2014 1:55 am
Posts: 1465
Location: Seattle,Washington USA
Took the rest of the shaper sheet I had and painted it charcoal and then dry brushed on some gray, tan and green.

I rolled up the sheet after it was dry and in between these shots - it is easy to store.

Image

Will probably cut it into two sheets when I decide what I want to do with it. If I was to try this again I think I would have bought the wider sheet - more options would be available to shape.

First shot is an idea for the Betrayer's home ground. Bought the temple coin bank when I was in South Korea.

Image

Just a rock wall.

Image

_________________
"Even darkness must pass. A new day will come. And when the sun shines it will shine out the clearer."


Last edited by Mapper on Tue Sep 05, 2017 7:36 pm, edited 1 time in total.
Top
  Profile  
Reply with quote  
 Post subject: Re: Quick and easy terrain - part 2
PostPosted: Sun May 03, 2015 10:00 am 
Elven Warrior
Elven Warrior
Offline

Joined: Thu Sep 12, 2013 4:02 pm
Posts: 532
Location: Kildare, Ireland
That temple looks perfectly scaled for wargaming, how much was it?

_________________
Click to: Show
Never gonna give you up
Never gonna let you down
Never gonna run around and
Desert you
Top
  Profile  
Reply with quote  
 Post subject: Re: Quick and easy terrain - part 2
PostPosted: Sun May 03, 2015 4:22 pm 
Loremaster
Loremaster
Offline

Joined: Wed May 21, 2014 1:55 am
Posts: 1465
Location: Seattle,Washington USA
I bought the temple at the gift shop at the Bulguksa Temple in Gyeongju, South Korea - maybe payed $20 for it?

Look at Warlord Games Samurai terrain for other ideas http://us-store.warlordgames.com/collec ... on/samurai

_________________
"Even darkness must pass. A new day will come. And when the sun shines it will shine out the clearer."
Top
  Profile  
Reply with quote  
 Post subject: Re: Quick and easy terrain - part 2
PostPosted: Tue May 12, 2015 1:10 pm 
Elven Elder
Elven Elder
User avatar
Offline

Joined: Thu Apr 01, 2010 11:33 pm
Posts: 3688
Location: Atlanta GA. U.S.A.
Images: 14
I have the old carts are they from the 80's or are they in production again.

_________________
"the same as a duck you must be made of wood"
Top
  Profile  
Reply with quote  
 Post subject: Re: Quick and easy terrain - part 2
PostPosted: Tue May 12, 2015 4:11 pm 
Loremaster
Loremaster
Offline

Joined: Wed May 21, 2014 1:55 am
Posts: 1465
Location: Seattle,Washington USA
They came out of my box of lead figures - 1988 Grenadier.

_________________
"Even darkness must pass. A new day will come. And when the sun shines it will shine out the clearer."
Top
  Profile  
Reply with quote  
 Post subject: Using Shaper Sheet and Moria Mold
PostPosted: Tue May 19, 2015 8:06 pm 
Loremaster
Loremaster
Offline

Joined: Wed May 21, 2014 1:55 am
Posts: 1465
Location: Seattle,Washington USA
Took the first piece of Woodland Scenics Shaper Sheet I had cut off and used as a wall for the Moria mold I had just gotten from http://keeblerstudios.com/

I like to try things out first before deciding how/if I will do the final board. The main door I will have to do with wood to make it larger, this door could be a back way in or up on a ledge.

Took the shaper sheet and glued it to some corrugated cardboard, cut out where the door and columns were (the columns were set back a 1/4 inch) and then glued the whole thing to the floor and to the back of the mold.

Added some pumice for debris and to add some more texture to the wall. Sprayed the whole thing with grey paint and then some dry brushing. Easier for me than cutting insulation or doing a plaster wall.

Image

_________________
"Even darkness must pass. A new day will come. And when the sun shines it will shine out the clearer."


Last edited by Mapper on Tue Sep 05, 2017 7:32 pm, edited 1 time in total.
Top
  Profile  
Reply with quote  
 Post subject: Re: Using Shaper Sheet and Moria Mold
PostPosted: Thu May 21, 2015 9:22 am 
Kinsman
Kinsman
User avatar
Offline

Joined: Wed Jan 08, 2014 10:53 pm
Posts: 160
Location: Wanganui, New Zealand
Pretty snazzy mapper. I'm liking the sound of this shaper paper. Looking forward too see what else you can come up with.

_________________
Backlog Status is getting worse all the time...

2014 Backlog Oathtaker (3 points)
Top
  Profile  
Reply with quote  
 Post subject: Re: Using Shaper Sheet and Moria Mold
PostPosted: Thu May 21, 2015 12:50 pm 
Elven Elder
Elven Elder
User avatar
Offline

Joined: Thu Apr 01, 2010 11:33 pm
Posts: 3688
Location: Atlanta GA. U.S.A.
Images: 14
I did not consider using the trim part flat. Good idea! 8)

_________________
"the same as a duck you must be made of wood"
Top
  Profile  
Reply with quote  
 Post subject: Another use for shaper sheet
PostPosted: Sun Oct 11, 2015 1:57 am 
Loremaster
Loremaster
Offline

Joined: Wed May 21, 2014 1:55 am
Posts: 1465
Location: Seattle,Washington USA
I built a bridge for my dwarf set, to be used in a future layout when I can build some more walls. Looking at the bridge I tried to imagine what I could have underneath it, a deep chasm or some lava.

Took my piece of shaper sheet (again) and repainted it (again) using craft paint. Used a round object to press the lava channels then dry brushed various oranges, reds and black on top. The texture of the shaper sheet makes it easy to dry brush.

Just a quick test of making a lava flow.

Image

Image

_________________
"Even darkness must pass. A new day will come. And when the sun shines it will shine out the clearer."


Last edited by Mapper on Tue Sep 05, 2017 7:37 pm, edited 1 time in total.
Top
  Profile  
Reply with quote  
 Post subject: Re: Another use for shaper sheet
PostPosted: Mon Oct 12, 2015 2:17 pm 
Elven Elder
Elven Elder
User avatar
Offline

Joined: Thu Apr 01, 2010 11:33 pm
Posts: 3688
Location: Atlanta GA. U.S.A.
Images: 14
Very nice idea

_________________
"the same as a duck you must be made of wood"
Top
  Profile  
Reply with quote  
 Post subject: Re: Another use for shaper sheet
PostPosted: Fri Oct 16, 2015 2:11 am 
Craftsman
Craftsman
Offline

Joined: Fri May 29, 2009 11:16 pm
Posts: 368
Location: New York, USA
Very nice idea and execution. I am surious about if it work the same way for a river?
Would you be able to use a gloss medium over it?
Just an idea.
Top
  Profile  
Reply with quote  
 Post subject: Re: Another use for shaper sheet
PostPosted: Fri Oct 16, 2015 4:19 pm 
Ringwraith
Ringwraith
User avatar
Offline

Joined: Wed Feb 08, 2006 1:56 am
Posts: 1938
Location: Louisville, KY
Images: 18
That's a very cool idea. That would be very useful for making a Mount Doom/Mordor board.

_________________
Respectfully,
Jonathan

Do what is right, love mercy, and walk humbly

Battle Companies
Top
  Profile  
Reply with quote  
 Post subject: Re: Another use for shaper sheet
PostPosted: Fri Oct 16, 2015 6:45 pm 
Loremaster
Loremaster
Offline

Joined: Wed May 21, 2014 1:55 am
Posts: 1465
Location: Seattle,Washington USA
Quote:
I am curious about if it work the same way for a river?
Would you be able to use a gloss medium over it?


Are you thinking of just using the shaper sheet without using water effects products on top - just paint? I would think it would work, let me pull out another scrap and see how it looks.

_________________
"Even darkness must pass. A new day will come. And when the sun shines it will shine out the clearer."
Top
  Profile  
Reply with quote  
 Post subject: Re: Another use for shaper sheet
PostPosted: Sat Oct 17, 2015 12:00 am 
Craftsman
Craftsman
Offline

Joined: Fri May 29, 2009 11:16 pm
Posts: 368
Location: New York, USA
Are you thinking of just using the shaper sheet without using water effects products on top - just paint?

No, actually I was wondering if the sheet would tolerate various "water " products.
Or will they leak?
Top
  Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 21 posts ]  Go to page 1, 2  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron