All times are UTC


It is currently Thu Mar 28, 2024 5:48 pm



Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: First timer..
PostPosted: Thu Jul 28, 2016 8:59 am 
Kinsman
Kinsman
User avatar
Offline

Joined: Sat May 28, 2016 9:15 am
Posts: 217
Location: Netherlands
So I started painting today with my first miniature being a warrior of minas tirith. Before I wanted to progress I wanted to get a few tips/tricks and feedback.

Image
Image
Image

The only thing I did so far was:

Flesh:
Base - Mournfang brown
Layer - Cadian flesh (2x thin layers)
Wash - Reikland fleshtone

Armor:
Base - Leadbelcher

However, I did not dare to do any highlights yet on the face and armor simply because well.. I can't get my brushes pointy enough..

I made a wet palette, and put my paints on there

Image

These are my brushes (left one is S Layer and the right one a starter brush)

Image

They are not pointy at all, I can't manage to get them pointy.. Do I not use enough paint or? I also got a size 0 and 1 W&N series 7 brushes, but I thought I would only use them until I am conformtable enough with painting. Mind you that this is my very first time! Any tips are welcome!!
Top
  Profile  
Reply with quote  
 Post subject: Re: First timer..
PostPosted: Thu Jul 28, 2016 9:25 am 
Loremaster
Loremaster
Offline

Joined: Sun Apr 13, 2014 7:20 am
Posts: 1367
Images: 14
You're starter brush won't get pointy. It's a starter brush. It, for lack of a better word, sucks for detail. You're layer brush should work but it looks like it has already fish hooked. The bend in the bristles is not a good sign. When was the last time you washed and reshaped your brushes?
Top
  Profile  
Reply with quote  
 Post subject: Re: First timer..
PostPosted: Thu Jul 28, 2016 9:49 am 
Kinsman
Kinsman
User avatar
Offline

Joined: Sat May 28, 2016 9:15 am
Posts: 217
Location: Netherlands
Well the starter brush I got from paired with some sets from LOTR, it was already used when I got it.

They layer brush however, was the first time ever painted with it and I got it brand new from the store.

After first time painting yesterday I cleaned the brushes with Brush Cleaner and they now look like this:

Image
Top
  Profile  
Reply with quote  
 Post subject: Re: First timer..
PostPosted: Thu Jul 28, 2016 4:26 pm 
Loremaster
Loremaster
Offline

Joined: Sun Apr 13, 2014 7:20 am
Posts: 1367
Images: 14
Do you still have your plastic tubes for the brushes? Those will help protect the brush's bristles. Also, after you are done cleaning your brush, you have to reshape the bristles. This can be done by setting the bristles in a crease of your hand, close the crease, then gently twisting and pull the brush out. Alternatively, you can stick the bristles in your mouth, purse your lips then pull the bristles out, twisting slightly.
Top
  Profile  
Reply with quote  
 Post subject: Re: First timer..
PostPosted: Thu Jul 28, 2016 6:04 pm 
Elven Warrior
Elven Warrior
Offline

Joined: Mon Mar 02, 2015 6:59 pm
Posts: 966
Location: Calgary, Canada
Great progress on your first mini! The colours are nice and evenly applied. You will probably want to invest in some Nuln oil (black wash) for your armour and to dull down the cloth if you over highlight it. I use India ink, but you really have to thin it with water and it's a blue-black. I'm also a consummate brush-licker. :rofl:

_________________
"Diplomacy is the art of saying 'nice doggie' until you can find a rock." -Will Rogers
Top
  Profile  
Reply with quote  
 Post subject: Re: First timer..
PostPosted: Thu Jul 28, 2016 7:05 pm 
Loremaster
Loremaster
Offline

Joined: Sun Apr 13, 2014 7:20 am
Posts: 1367
Images: 14
Washing your brush, shaping it and storing it in your plastic tube will result in a good point. This is the army painter masterclass brush. Roughly equivalent to a size 1 or zero. For sale from army painter, this bad boy retails for $9 US.


You do not have the required permissions to view the files attached to this post.
Top
  Profile  
Reply with quote  
 Post subject: Re: First timer..
PostPosted: Fri Jul 29, 2016 8:42 am 
Kinsman
Kinsman
User avatar
Offline

Joined: Sat May 28, 2016 9:15 am
Posts: 217
Location: Netherlands
@Greatkhan Thanks! I do have Nuln Oil so I will apply that later on! ;)

@Jdizzy I do have size 0 and 1 from the W&N Series 7
Top
  Profile  
Reply with quote  
 Post subject: Re: First timer..
PostPosted: Fri Jul 29, 2016 9:48 am 
Wayfarer
Wayfarer
User avatar
Offline

Joined: Mon Nov 23, 2009 11:15 am
Posts: 37
Most has already been said here, taking care of your brush is very important.

If you're afraid to use your W&N brushes already then I can really suggest Rosemary & co series 33 brushes. They are about 2/3 of the prize, they do wear out a bit quicker, but they are very good quality and very well suited for beginners in my opinion.

A piece of advice on the painting: try to draw a thin, dark line between the face and the helmet, right where the two surfaces meet. This will create the illusion of a shadowy line which separates the two surfaces and will really help with overall contrast and look of the miniature. Actually you should do this with all surfaces.

Thin your paint enough so it can really flow into that recess easily, apply carefully with pointy brush :)

_________________
www.corvusminiatures.com
youtube.com/user/CorvusMiniatures
facebook.com/CorvusMiniatures
twitter.com/CorvusMinis
Top
  Profile  
Reply with quote  
 Post subject: Re: First timer..
PostPosted: Fri Jul 29, 2016 1:11 pm 
Kinsman
Kinsman
User avatar
Offline

Joined: Sat May 28, 2016 9:15 am
Posts: 217
Location: Netherlands
Thanks for the tips!

I used my S Layer as well, but right from the getgo it wasn't pointy.. How can I fix this? Maybe with the brush cleaner?
Top
  Profile  
Reply with quote  
 Post subject: Re: First timer..
PostPosted: Fri Jul 29, 2016 1:16 pm 
Wayfarer
Wayfarer
User avatar
Offline

Joined: Mon Nov 23, 2009 11:15 am
Posts: 37
MacCollac wrote:
Thanks for the tips!

I used my S Layer as well, but right from the getgo it wasn't pointy.. How can I fix this? Maybe with the brush cleaner?


Try wetting the brush between your lips to make a good point before storing it.
Or else you can try shaping it with some brush soap and then leaving it to dry. But be sure to rinse it first before using it to paint next time :)

When brushes appear faulty after you buy them it's best to return them or ask for a replacement right away. New brushes are not supposed to have bent or split points, especially not with the more expensive ones...

_________________
www.corvusminiatures.com
youtube.com/user/CorvusMiniatures
facebook.com/CorvusMiniatures
twitter.com/CorvusMinis
Top
  Profile  
Reply with quote  
 Post subject: Re: First timer..
PostPosted: Fri Jul 29, 2016 6:01 pm 
Loremaster
Loremaster
Offline

Joined: Sun Apr 13, 2014 7:20 am
Posts: 1367
Images: 14
Since it is a layer brush, it may not form a point. Layer brushes are meant to lay down the maximum volume of paint with each stroke. You may need to find yourself a detail brush.
Top
  Profile  
Reply with quote  
 Post subject: Re: First timer..
PostPosted: Fri Jul 29, 2016 11:00 pm 
Kinsman
Kinsman
User avatar
Offline

Joined: Sat May 28, 2016 9:15 am
Posts: 217
Location: Netherlands
As mentioned before I have W&N size 0 and 1 , guess they will do :)
Top
  Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: